Denso BHT-200QW Especificações

6 • Never put the BHT in places where there are excessively high temperatures, such as inside closed-up automobiles, or in places exposed to direct

7 Components and Functions Indicator LEDIlluminates in blue when the BHT has successfully read a 2D code or bar code. Touch screen LCD (liqu

8  Grip style BHT Trigger switch (M5 key) Press this switch to start code reading.

9 30-key pad *Provided on the grip style BHT only. ENT (Enter) keyFinalizes the inputted data or operations, and starts the corresponding proc

10 26-key pad *Provided on the grip style BHT only. ENT (Enter) keyFinalizes the input data or operations, and starts the corresponding process

11 Operating the Touch Screen You can perform tasks by tapping the elements on the touch screen LCD with the stylus that comes with the BHT. Actio

12 Reading 2D Codes and Bar Codes Turn the BHT on, bring the reading window to a target 2D or bar code, and press the trigger switch. The BHT turns

13 • If the BHT fails to read due to specular effects or other factors, change the scanning angle of the reading window or the distance from codes

14 Using Radio Link The BHT-202QW-CE supports spread spectrum communication. • If there are too many communications errors, first make sure that th

15 Using Infrared Link  CU-200 Make sure that the BHT is securely in the CU-200. Grip style BHT Shield the IrDA interface from direct sunl

If you leave the BHT with the battery cartridge discharged or with no battery cartridge loaded or if you replace the battery cartridge in a wrong w

16 Loading the Battery Cartridge Before the first use of the BHT, be sure to load the battery cartridge as shown below. The battery cartridge is no

17  Into the grip (1) Take the bottom cover off the grip by removing the screw. (2) Pull the lock in the direction of the arrow and insert the

18 • The BHT integrates a rechargeable backup power source which backs up the memory and calendar clock in the BHT when no battery cartridge is lo

19 Calibrating the Touch Screen At the first use of the BHT, you need to calibrate the touch screen and set up the calendar clock. Press the power

20 BHT Turning-off Notes If you press the power key to turn off the BHT, the BHT displays the following message and starts preparation for shutdow

21 Battery Replacement Notes  When is battery replacement needed? If the "Charge the battery!" appears on the LCD, replace the recharge

22 Warm and Cold Booting  Warm-booting the BHT In any of the following cases, warm-boot the BHT: • The BHT makes no response to entry from the to

23  Cold-booting the BHT If a problem persists even after warm-booting the BHT, cold-boot the BHT. Cold-booting the BHT will erase all data store

24 About Status Indicators Battery voltage level Shows the current battery voltage level. Displays when the voltage level is high. Displays when th

25 Wireless Zero Configuration radio state (Provided on the BHT-202QW-CE) Indicates that the Wireless Zero Configuration (WZC) radio is connected t

● DENSO WAVE INCORPORATED does not assume any product liability arising out of, or in connection with, the application or use of any product, circui

26 Setting the Backlight 30-key pad Pressing the right-hand trigger switch (M4 key) with the SF/ALP key held down activates or deactivates the back

27 26-key pad Pressing the right-hand trigger switch (M4 key) with the SF key held down activates or deactivates the backlight function. *For on

28 Adjusting the Beeper Volume, Switching the Beeper & Vibrator, Calibrating the Touch Screen, and Setting the Backlight You can adjust the bee

29 ⇓ The "Device Settings" menu appears. Adjusting the beeper and switching the beeper and vibrator Double-Tap the "Beeper/Vibra

30 Tap the "Rumble Device" tab calls up the screen shown at left. You may select any of three ways--beeping only, vibrating only, and com

31 Tap the "Recalibrate". Follow the instructions on the screen. Refer to the "Calibrating the Touch Screen."

32 Setting the backlight Double-tap the "Control Panel" icon on the "Device settings" menu, and double-tap the "Backlight&

33 Error Messages If some error occurs when the power is turned on or during program execution, one of the following error messages will appear on

34 Shutdown due to low battery  Problem When the power is turned on or off or during execution of programs (System Mode or applications), the batt

35 Proper Care of the BHT Wipe the BHT's charge terminals and battery cartridge terminals with a cotton swab or the like periodically. Clean

Touch-pen (Stylus) Hand strap Equipment Check Ensure that none of the following items are missing prior to use. Please contact your dealer if any

36 Handling Notes • An early upload of gathered data is recommended, since the data stored in the RAM might be affected by the so-called "soft

37 US and Canada Regulations This device complies with Part 15 of the FCC Rules, Canadian ICES-003 and RSS-210 Rules. Operation is subject to the

38 LABELING:  Regular style BHT  Grip style BHT

39 Thank you for purchasing our product. We would like to offer you the following support and assistance for your more convenient use of our pro

4-2-12, Toranomon, Minato-ku, Tokyo, Japan 105-0001 http://www.denso-wave.com/ 496996-0401 This manual uses recycled p

1 Contents SAFETY PRECAUTIONS...2 Componen

2 SAFETY PRECAUTIONS Be sure to observe all these safety precautions. Strict observance of these warnings and cautions is a MUST for preventing acc

3 Handling the battery cartridge • Never disassemble or heat the rechargeable battery cartridge, nor put it into fire or water; doing so could cau

4 Handling the BHT • The BHT uses a laser light for indicating the scanning range. The intensity of the laser light might be too low to inflict bo

5 Handling the rechargeable cartridge • Never charge a wet or damp rechargeable battery cartridge. Doing so could cause the batteries to break