Denso GT10B-SB Manual do Utilizador descarregar pdf (Página 22)

z When using a commercially available bar code generator, generate it in the following format.

Bar code type Code 128, Code set A

Value ADDR followed by Bluetooth



address (in hexadecimal)

(Example) Bluetooth



address 000AF1234567

ADDR000AF1234567

(3) Use the scanner to read the "Bluetooth



address" bar code created in step (2) above.

The scanner as a master initiates connection to the specified Bluetooth



device, switching the scanner from the

slave configuration first, if necessary.

(4) Wait for the scanner to beep twice and the indicator LED to turn green (for 0.5 second), indicating a successful

connection.

Note: The scanner supports Bluetooth



pairing (authentication using pass keys) when connecting to slave devices.

For further details, first see Appendix 4 and then refer to the user's manual for the target device.

Scanner as Slave (default)

The scanner is a slave by default. This slave can establish a Bluetooth



wireless link with the BA10-RKU Bluetooth

adapter (or some other Bluetooth



equipment) as a master without special communication procedures.

(1) If the scanner is currently a master, read the following bar code to switch it to slave operation.

Configure as slave

(2) Wait for the scanner to beep three times, press the scanner's trigger switch, and wait approximately two minutes

(default) for the master device to connect to this slave.

(3) Configure the Bluetooth

adapter (or some other Bluetooth



equipment) as a master and specify the scanner's

Bluetooth



address.

For the Bluetooth

adapter, use the configuration software (BASetting). (For other Bluetooth



equipment, use the

procedures set forth in the user's manual.)

(4) Wait for the Bluetooth

adapter (or some other Bluetooth



equipment) to establish a Bluetooth



wireless link

with the scanner as a slave.

(5) Wait for the scanner to beep twice and the indicator LED to turn green (for 0.5 second), indicating a successful

connection.

Note: If a search by a master device finds no scanners within effective range, increase the scanner connection

timeout interval for slave operation and try again.

Note: The scanner also supports Bluetooth



pairing (authentication using pass keys) when connecting to master

devices. For further details, first see Appendix 4 and then refer to the user's manual for the target device.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 143 144

Comentários a estes Manuais

Sem comentários

Denso GT10B-SB Manual do Utilizador Página 22

Comentários a estes Manuais

Manuais e produtos relacionados com Leitores de códigos de barras Denso GT10B-SB