Denso AT27Q-SB Manual do Utilizador

2D Code Handy Scanner AT27Q-SB User's Manual

vi Handling the scanner Wrong handling of the battery cartridge could result in a heat, smoke, explosion, or fire. Be sure to observe the followin

87 (11) Trigger switch control Items Parameters Defaults Refer to: Auto-off mode  Momentary switching mode Momentary switching mode (Reverse Type

88 (12) Beeper, indicator LED, marker beam and illumination LEDs Items Parameters Defaults Refer to: Enable  Beeper control Disable Low beeping to

89 (13) Data verification conditions and data editing conditions Items Parameters Defaults Refer to: Data block verification Data to be verified Da

90 Items Parameters Defaults Refer to: Search string and substitution string in data substitution mode Max. 16 ASCII characters No specified.Number

91 Chapter 12 QR-Coded Parameter Menu 12.1 Customizing the Scanner with the QR-Coded Parameter Menu Start setting Use the scanner to read the

92 12.2 QR-coded Parameter Menu To set the parameters, simply scan the QR codes below. Scanning "Start setting" QR Code symbol and "

93  Menu control (Starting/Ending the Setting Procedure and Reverting to Defaults) Start setting Start setting (When the "White code on bl

94  Bluetooth® interface and link Enabling/disabling Bluetooth® interface and breaking the Bluetooth® wireless link Start operation (default) End

95  Bluetooth® wireless communications parameters Procedure Non-acknowledge mode (default) ACK/NAK mode Header (SPP Profile) None (default) ST

96 Timeout period for slave to wait for a connection request 2 minutes (default) 4 minutes 10 minutes 30 minutes  Data transmission format Tr

vii Components Required The scanner (AT27Q-SB) requires the following components that differ depending upon whether the communications adapter is use

97  2D codes, mirror image and black-and-white inverted codes Scanning MicroQR Code Disable Enable (default) Scanning black-and-white inverted co

98 Scanning MaxiCode Disable Enable (default) Scanning Data Matrix Disable Enable (default)  Bar codes Scanning UPC-A, UPC-E, EAN-13 an

99 Scanning Code 128 (EAN-128 (GS1-128)) Disable Enable (default) Scanning Codabar (NW-7) Disable Enable without a check digit (default) E

100 Scanning Code 39 Disable Enable without a check digit (default) Enable with a check digit (Check digit transmission enabled) Enable with

101  Other settings Trigger switch control Auto-off mode (default) Alternate switching mode Momentary switching mode Continuous reading mode 1

102 Chapter 13 QR-Coded Parameter Menu for Communications Adapters (BA11/10-RKU) 13.1 Customizing the Communications Adapter from the Scanner Th

103 End of transfer After normal end of transfer of parameter settings, the scanner's indicator LED turnsblue with one beep. If the parameter t

104 13.2 QR-Coded Parameter Menu for Communications Adapters  Menu control (Starting/Ending the Setting Procedure and Reverting to Defaults) Start

105  Communications parameters for USB-COM interface Monitoring CTS (USB-COM interface) Disable Enable (default)  Communications parameters fo

106 Data bit (RS-232C interface) 7 bits 8 bits (default) Parity (RS-232C interface) None (default) EVEN ODD Stop bit (RS-232C inter

viii Bluetooth® Wireless Communication Link The scanner AT27Q-SB uses Bluetooth® wireless networking technology. Item Specifications Standard Bluetoot

107  Specifying communications parameters for the USB keyboard interface Specifying the keyboard type with USB keyboard interface ※Above default is B

108 Chapter 14 Troubleshooting Problem 1: Low reading efficiency. Probable cause What to do:  A target code is not within the scan range of the rea

109 Appendix 1 Specifications Item AT27Q-SB Readable codes QR Code (Model 1 and Model 2), MicroQR, SQRC (*1), iQR, PDF417, MicroPDF417, MaxiCode, D

110 Appendix 2 Control Commands Control commands refer to commands that are exchanged between the host computer and the scanner via the communicatio

111 Transfer Direction Control Commands Scanner HostFunction LR (Note 3) Light the red indicator LED Within 100 ms from the receipt of th

112 Transfer Direction Control Commands Scanner HostFunction OK Verification match If code data scanned matches master data in data verifi

113 Appendix 3 Bluetooth Glossary The table below lists Bluetooth terms used in this manual. Bluetooth Address (BD_ADDR) Bluetooth Device Addres

. 2D Code Handy Scanner AT27Q-SB User's Manual Second Edition, December 2013 DENSO WAVE INCORPORATED

1, Yoshiike, Kusagi, Agui-cho, Chita-gun, Aichi 470-2297, Japan http://www.denso-wave.com/

ix Care and Maintenance Proper Care of the reading window Dust or dirt accumulating on the clear plate of the code reading window will affect readi

1 Chapter 1 Names and Functions Reading window Bring this window to a code to be scanned. Trigger switch Press this switch to read d

2 Chapter 2 Bluetooth Interface For terms relating to Bluetooth wireless communication in this manual, refer to Appendix 3 "Bluetooth Glossa

3 2.2 Establishing Bluetooth Wireless Link After enabling the Bluetooth interface, establish a Bluetooth wireless link between the scanner and the

4 Scanner as Master To configure the scanner as a master and the communications adapter (or some other Bluetooth equipment) as a slave, follow the sa

5 When connecting the scanner with an iPhone or iPad. Follow the procedures below when connecting the scanner with an iPhone or iPad. When using th

6 2.3 Breaking Bluetooth Wireless Links Holding down the trigger switch for 5 seconds or scanning the "Break Bluetooth wireless link" QR C

Copyright © DENSO WAVE INCORPORATED, 2013 All rights reserved. No part of this publication may be reproduced in any

7 2.5 Indication of Bluetooth Wireless Link Status The scanner's indicator LED and beeper together indicate the status of the scanner's Bl

8 Chapter 3 Reading Codes 3.1 Before Use Be sure to charge the battery cartridge loaded in the scanner with the dedicated charger before using the

9  Scanning mode Regular read mode This mode transfers the code data when the scanner has read the code successfully. Data verification mode This m

10 Chapter 4 Customizing the Scanner You can customize the scanner by modifying communications, code type, and other scanner parameters with the QR

11 Chapter 5 Scanning Control Two types of scanning controls are available--Trigger switch control and Software control. Trigger switch control: Pres

12 5.2 Software Control You can control the scanner by sending scanning control commands from the host computer via the Bluetooth interface, instead

13 Chapter 6 Scanning Functions 6.1 Data Verification Mode The data verification mode verifies the code data read against the master data stored in

14  2-point verification Scan master registration 1) Switch the scanner to the data verification mode. The indicator LED lights in green. 2) Use th

15 6.1.2 Specifying a verification object You can specify two types of verification objects--data string and data block. For data string verification

16 6.1.3 Verification result output (1) Report of match/mismatch status You can select any of the following report types using the configuration sof

Contents Preface...

17 6.2 Editing Data You can edit and output code data read, in any of the four data edit modes--"data extraction mode," "data substitut

18  Extraction start and end positions "Extraction start position" "Extraction end position" Head position Tail position nth pos

19 6.2.1.2 Extracting data blocks If data read is in the comma-delimited CSV format, the scanner extracts data blocks specified by the data block num

20 Example Code read: QR Code, Data: (See the table below.) Header: STX, Terminator: ETX, Scanner ID: Disable, Code ID mark: Disable, Transmissio

21 6.2.1.3 Extracting AI (Application Identifier)-prefixed strings If the scanner reads any of GS1-128 (EAN-128), GS1 DataBar (RSS), and EAN.UCC Comp

22 Example Data read: (01)94901234567894(11)030808(13)030810(17)040208(17)040305 Header: STX, Terminator: ETX, Scanner ID: Disable, Code ID mark: D

23 (2) AI parenthesizing mode In this mode, the scanner parenthesizes AIs contained in data read and outputs the edited data according to the extracti

24 (3) AI table In the AI-prefixed string extraction, the scanner edits data according to the Application Identifiers (AIs) defined below. AI Format

25 AI Format Description 320n n4+n6 Net Weight, Pounds (***) 321n n4+n6 Length or 1st Dimension, Inches (***) 322n n4+n6 Length or 1st Dimen

26 AI Format Description 353n n4+n6 Area, Square Inches, Logistics (***) 354n n4+n6 Area, Square Feet, Logistics (***) 355n n4+n6 Area, S

Chapter 7 Beeper, Indicator LED, Marker Beam, and Illumination LEDs...35 7.

27 AI Format Description 421 n3+n3+an..9 Ship to (Deliver to) Postal Code with Three-Digit ISO Country Code Prefix 422 n3+n3 Country of Origin of

28 AI Format Description 93 n2+an..30 Company Internal Information--Company 94 n2+an..30 Company Internal Information--Company 95 n2+an..30 Com

29 6.2.2 Data substitution mode If the scanner reads a code specified by the "Code type" in this mode, it searches the data read for the sp

30 6.2.3 Data blocksorting mode The scanner splits code data read into a maximum of 5 blocks at the specified split positions, sorts those blocks in

31 6.2.4 ADF script mode The ADF script refers to a simple program language designed for editing of data read. It enables the following functions. (1

32 6.3 Point Scan Mode In the point scan mode, you can aim at a target code by matching up the center spot of the marker beam with that code. If ther

33 6.6 Scanning Structured Appended QR (iQR) Code Symbols QR Code symbology can split data into a maximum of 16 blocks and encode each of them into a

34 6.7 Multi-line Barcode Scanning The scanner can scan up to 3 lines of bar codes in the readable area at any one time. You can specify the number o

35 Chapter 7 Beeper, Indicator LED, Marker Beam, and Illumination LEDs 7.1 Beeper (1) Beeping The scanner emits a short or long beeps, once or a co

36 (2) Adjusting the beeper volume You can adjust the beeper volume to three levels--high, medium and low--using the QR-coded parameter menu or confi

i Preface Thank you for using the AT27Q DENSO WAVE 2D code Handy Scanner. Please READ through this manual carefully. It will enable you to operate you

37 7.2 Indicator LED The indicator LED lights or flashes in blue, green, red or orange as described below. The indicator LED lights in blue when: - th

38 The indicator LED can be disabled with the QR-coded parameter menu or configuration software (ScannerSetting_2D). In any of the following cases, ho

39 7.3 Marker Beam The red marker beam (semiconductor laser) comes on to indicate the scanning area as a guide. The marker provides a choice of the th

40 Chapter 8 Communication 8.1 Bluetooth Interface The QR-coded parameter menu and the configuration software (ScannerSetting_2D) provide a choice o

41 8.2 HID Profile The scanner supports the Human Interface Device Profile (HID) that enables connecting to an iPhone or iPad equipped with Bluetooth

42 8.3 Communication Format  Data transmission format Select one of the following two data transmission formats. No. of digits Header Scanner ID Co

43 (5) Code ID mark This optional field specifies the code system. It offers ten combinations with five code ID marks (Type 1, Type 2, Type 3, Type 4

44 (1/2) Code ID mark Type 1 Type 2 Code type Coupling Separating Coupling Separating Without add-on A A Linear component A A With 2-digit add-on

45 (1/2) Code ID mark Type 1 Type 2 Code type Coupling Separating Coupling Separating RSS V R V R RSS (Note 1) CC-A RSS (Note 1) CC-B CC-A, CC-B No

46 (2/2) Code ID mark Type 3 Type 4 (Note 3) Code type Coupling Separating Coupling Separating QR Code P01 ]Qm Edit mode P01 ]Qm Batch edit mode

ii SAFETY PRECAUTIONS Be sure to observe all these safety precautions.  Please READ through these instructions carefully. They will enable you to use

47 (2/2) Code ID mark Type 3 Type 4 (Note 3) Code type Coupling Separating Coupling Separating Without add-on A ]X0 Linear component A ]X3 ]X0 W

48 (2/2) Code ID mark Type 3 Type 4 (Note 3) Code type Coupling Separating Coupling Separating RSS T R ]e0 RSS (Note 1) CC-A RSS (Note 1) CC-B CC-A,

49 (Note 1) GS1 DataBar (RSS) represents: GS1 DataBar Omnidirectional (RSS-14), GS1 DataBar Truncated (RSS-14 Truncated), GS1 DataBar Limited (RSS-14

50 (6) Number of digits This optional field specifies whether or not to transmit the number of digits (2 or 4 bytes) of code data to transmit or disa

51 UPC-A You can select whether or not to transmit the padding character "0," number system character "S," and a check digit to th

52 UPC-E You can select whether or not to transmit the padding character "0," number system character "S," and a check digit to th

53 EAN-13 You can select whether or not to transmit the two prefix characters "P1" and "P2" and a check digit to the host. The con

54 EAN-8 with add-on A code ID mark precedes add-on code data under the conditions "Code ID mark: Type 4" and "Code ID mark output mode

55 GS1 DataBar (RSS) Code data read will be transmitted as is. FNC1 of GS1 DataBar Expanded (RSS Expanded) will be converted to GS(1Dh) and can be sel

56 8.4 GTIN Format Conversion Enabling the GTIN (Global Trade Item Number) format conversion allows UPC-A, UPC-E, EAN-13, EAN-8, and Interleaved 2of5

iii To System Designers:  When introducing the scanner in those systems that could affect human lives (e.g., medicines management system), develop

57 - Conversion to 14-digit GTIN format (PI added) With 2-digit add-on: PI 0 S X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 C/D X11 X12 (*2) With 5-digit add-on: PI

58 - Conversion to 14-digit GTIN format (PI added) With 2-digit add-on: X6=0-2 PI 0 S X1 X2 X6 0 0 0 0 X3 X4 X5 C/D X7 X8 (*2) X6=3 PI 0 S X1 X2 X3

59 EAN-8 - Data read P1 P2 P3 X1 X2 X3 X4 X5 C/D Pn: Prefix characters - Conversion to 16-digit GTIN format (AI "01" and PI added) 0 1 PI 0

60 (2) Conversion from GS1 DataBar (RSS)/GS1-128 (EAN-128) in GTIN format to EAN format GS1 DataBar (RSS) or GS1-128 (EAN-128) data read in the GTIN

61 8.5 Data Packaging (Packetizing) Data packaging is available to boost the reliability of data transfers over the Bluetooth wireless link from th

62 Using scanner connected to other than communications adapter Scanner settings: Data packaging mode (to host)  Transfer data packets. 

63 Example of analysis for packet received Data received (hexadecimal) 10H 02h 00h 13h 00h 00h 31h 32h 33h 34h 35h 36h 37h 38h 0Dh C4h 18h 10h 03h

64 Chapter 9 Charging and Replacing the Battery Cartridge The scanner sounds a warning when the charge is low. Immediately recharge the battery car

65 Charging procedure (1) Connect the AC adapter to the charger and then plug it into an electrical outlet. Confirm that the charger's green

66 9.2 Replacing the Battery Cartridge The rechargeable battery cartridge is a consumable part with a finite service life. It is time to replace i

iv Handling the scanner Wrong handling of the battery cartridge could result in a heat, smoke, explosion, or fire. Be sure to observe the following

67 (5) Connect a new battery cartridge to the battery cable connector. (6) Insert the new battery cartridge into the scanner. (7) Route the cables

68 9.3 Recycling the Battery Cartridge The Li-ion battery inside the rechargeable battery cartridge contains recyclable rare elements, so please recy

69 Chapter 10 Image Capturing 10.1 Outline The scanner supports image capturing that allows you to capture a graphic as a bitmap (BMP) or JPEG imag

70 m: Image size 0 Standard VGA 2 1/4 VGA 4 1/16 VGA n: Image output area F Full image area C Center portion of the image area o: Thumbnail 0 Disab

71 (7) Image transmission time required (Typical) The table below lists the typical image transmission time required from image capturing to convers

72 Chapter 11 Parameters and Defaults The tables below list the parameters and their defaults. Those parameters can be changed with the QR-coded pa

73 (3) Bluetooth communications parameters for SPP Profile Items Parameters Defaults Refer to: Non-acknowledge mode  ACK/NAK mode Communications

74 Items Parameters Defaults Refer to: Enable Special key transfer mode Disable  (See Note 4.) Enable  Software keyboard Disable (Note 4) S

75 (5) Bluetooth communications parameters Items Parameters Defaults Refer to: As a master As a slave  Configure the scanner as master or slave N

76 (6) Data transmission format for SPP Profile Items Parameters Defaults Refer to: None  STX Header User-defined None ETX CR  LF CR LF

v Handling the scanner Wrong handling of the battery cartridge could result in a heat, smoke, explosion, or fire. Be sure to observe the following

77 (7) Data transmission format for HID Profile Items Parameters Defaults Refer to: NONE  STX ETX CR LF CR LF TAB ESC ENTER Right Ct

78 (8) Data transmission format common to all interfaces Items Parameters Defaults Refer to: Enable Transmission of code ID mark Disable  Sectio

79 (9) 2D codes, mirror image, black-and-white inverted codes and SQRC Items Parameters Defaults Refer to: Enable Reading mirror image codes Disab

80 Items Parameters Defaults Refer to: Enable (SQRC and QR Code symbols) Enable (SQRC symbol only) Reading SQRC Disable  Reading disabled  SQRC

81 (10) Bar codes UPC-A/E, EAN-13/8 Items Parameters Defaults Refer to: Enable  Scanning UPC-A and EAN-13 Disable Sections 9.4 and 12.2 Enable 

82 Items Parameters Defaults Refer to: Enable  Reading EAN-8 Disable Sections 9.4 and 12.2 Enable  EAN-8 transmission of check digit Disable E

83 Codabar (NW-7) Items Parameters Defaults Refer to: Enable, without a check digit  Enable, with a check digit (Check digit transmission enabled)

84 Code 128, GS1-128 (EAN-128) Items Parameters Defaults Refer to: Enable  Reading Code 128 Disable Enable  Reading GS1-128 (EAN-128) Disable S

85 GS1 DataBar (RSS), EAN.UCC Composite symbols Items Parameters Defaults Refer to: Enable Reading GS1 DataBar Omnidirectional, GS1 DataBar Truncate

86 Multi-line barcode scanning Items Parameters Defaults Refer to: Enable Reading multi-line bar codes Disable  Two lines  Number of lines for m