Denso BHT-825QW Manual do Utilizador descarregar pdf (Página 116)

101

2D Code Handy Terminal

[5] Setting the communication environment

The communication environment settings following system initialization are follows.

Do not change these settings unless necessary.

Item Default

Interface port Optical (infrared interface port)

Communication protocol Ymodem protocol

Infrared interface port

TRANSMIT SPEED Baud rate 115200 bps

PROTOCOL Protocol options SERIAL No.: ON (Adds serial numbers to data

blocks.)

H. PARITY: ON (Adds horizontal parity.)

LINKUP TIME: 30 seconds

FIELD SPACE: Ignore (Trim)

Use the following procedure if necessary to change the communication environment settings.

1. Select “5: COMMUNICATION” at the SET SYSTEM menu and then

press the ENT key.

The SET COMMUNICATION menu screen on the right displays.

2. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2]) to highlight

the item to be set and press the ENT key.

“1: OPTICAL”:

Changes the infrared communication parameters.

“2: PROTOCOL TYPE”:

Changes the communication protocol setting.

Refer to the following section for details of the above items.

Press the BS/C key to return to the SYSTEM MENU.

 “1: OPTICAL”: Infrared communication parameters

1. Select “1: OPTICAL” at the SET COMMUNICATION menu and then

press the ENT key.

The SET OPTICAL menu screen on the right displays.

2. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2]) to

highlight ”1: PARAMETER” or ”2: PROTOCOL”, and then press the

ENT key.

Press the BS/C key to return to the SET SYSTEM menu.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 252 253

Sem comentários

Denso BHT-825QW Manual do Utilizador Página 116