Denso BHT-825QW Manual do Utilizador descarregar pdf (Página 179)

164

BHT-825Q series

 Wireless Security WPA2-PSK Mode

PSK authentication and an encryption system can be used with wireless security WPA2-PSK mode.

1. Select “2: CONFIGURATION” at the SET SECURITY menu and

then press the ENT key.

The screen on the right displays.

[1: AUTH PARAM (PSK)]: PSK authentication parameter setting

[2: WPA CIPHER]: Encryption system setting

Press the BS/C key to return to the SET SECURITY menu.

2. Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1:

AUTH PARAM (PSK)] and then press the ENT key.

The screen on the right displays.

[1:PRE SHARED KEY]: Sets the shared key.

3. Ensure that [1: PRE SHARED KEY] is highlighted and then press

the ENT key.

The mode changes to entry mode and the cursor displays.

4. Use the numerical keys to enter a shared key and press the ENT

key.

Press the SF key to change the entry mode (numerical entry (no guidance

display) and alphabet entry).

To delete a single character, press the BS/C key. To delete the entire entry,

press and hold the BS/C key, or press the SF key and BS/C key

simultaneously.

5. Press the BS/C key to return to the SECURITY CONFIG menu.

6. Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2:

WPA CIPHER] and then press the ENT key.

The screen on the right displays.

[1:CIPHER MODE]: Selects TKIP or AES.

7. Ensure that [1: CIPHER MODE] is highlighted and then select TKIP or

AES.

Select TKIP to use TKIP.

Select AES to use AES.

8. Press the ENT key or BS/C key to return to the SECURITY CONFIG menu.

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 252 253

Sem comentários

Denso BHT-825QW Manual do Utilizador Página 179